Manufacturer of Metallurgical Testing Equipmen


Always working to provide better products for you

Online Books

Product Center 

SYD-14201 Pellet compression strength tester
    发布时间: 2014-09-24 15:19    

The maximum loaded pressure on pellet before crushing is applied to represent the strength of pellet, which is used for the evaluation on mechanical strength of pellets. Before entering for reduction in blast furnace or direct reduction furnace, the collision, extrusion and friction of pellets during transportation and stacking may also cause the crushing of pellet to some extent. Hence, it is also harmful for the smelting of blast furnace. Pellets with high mechanical strength will provide an ideal gas permeability during the reduction, and hence t the testing of pellet compression strength has been widely applied.

SYD-14201 Pellet compression strength tester


Application

The maximum loaded pressure on pellet before crushing is applied to represent the strength of pellet, which is used for the evaluation on mechanical strength of pellets. Before entering for reduction in blast furnace or direct reduction furnace, the collision, extrusion and friction of pellets during transportation and stacking may also cause the crushing of pellet to some extent. Hence, it is also harmful for the smelting of blast furnace. Pellets with high mechanical strength will provide an ideal gas permeability during the reduction, and hence t the testing of pellet compression strength has been widely applied.

The product is developed based on the latest GB/T14201: Iron ore pellets compressive strength measuring method, ISO4700: The determination of iron ore pellets compressive strength, STM E 382 and integrated the international high-end dynamic high speed mechanical measuring technology.

Technical parameters:

1.The maximum strength of pellets before crushing will only last for less than 1ms, and hence the primary technology of this machine is its dynamic testing property under high speed crushing.

2.An AC servo motor is applied for the loading unit, which can eliminate the influence of pulses produced by the loading of stepping motor and regular motor. Consequently, the loading of force is linear during the whole testing process.

3.The speed of pressure head is stepless adjustable in a certain range, which is suitable for the investigation on variation of pellet strength with loading speed.

4.In order to improve the work efficiency, the charging and disposal process can be done at the same time. Meanwhile, automatic fast forward or retreat at idle mode is also supported, which can save much time comparing to other similar models.

5.All operation of test and processing of measured data can be done through the provided software and the density of data on pressure and displacement curves is settable. The results can be automatically calculated, while the analysis of results in group automatic generation of testing report are supported.




Technical parameters:

Voltage: AC 220V±10%, 50Hz;

Rated power: 200W(Max);

Loading features (high-speed mechanical sensors):

Range: 0 to 10kN, (1000dN)

Accuracy: 0.1%FS (10N);

Resolution: 0.01%FS (1N);

Nonlinear: ±0.2%FS;

Repeatability: ±0.1%FS;

Hysteresis: ±0.2%FS;

Maximum workload: 500%FS

Loading speed (adjustable): 10.0 to 20.0mm/min.

Compression displacement features:

Displacement accuracy: 0.01mm;

Displacement resolution: 0.01mm

High speed measurement characteristics (high-speed A/D converter):

High speed dynamic A/D conversion rate (adjustable): 3000 times/s;

Maximum capture ability: 0.17ms.

Test sample auxiliary body features:

Working plate: high speed stepped rotation and positioning, crushing and waste disposal;

Disposal: automatic;

Storage: sealed waste box.

Feeding mechanism

Sample loading quantity: 1000 grains

Feeding: 1grain.

For more information, please contact us